Changzhou Hetai Motor And Electric Appliance Co., Ltd.
Changzhou Hetai Motor And Electric Appliance Co., Ltd.
Add to Cart
Another reason to use a gearbox with a stepper motor is to increase the torque available to drive the load. When the load is driven by a motor-gearbox combination, the gearbox multiplies the torque from the motor by an amount proportional to the gear ratio and the efficiency of the gearbox.
Since stepper motors and other control motors are designed to allow accurate positioning, the gearheads used for these motors must provide the same level of accuracy.A gearbox—otherwise known as a gear reducer or speed reducer—is a set of gears that can be added to a motor to drastically decrease speed and/or increase torque.Each gearbox type works in unison with a motor to achieve the desired speed-torque output.
Electrical Specification:
| STEP ANGLE | °/STEP | 1.8 |
| RATED VOLTAGE | V | 12 |
| CURRENT | A/PHASE | 0.5 |
| RESISTANCE | Ω/PHASE | 24 |
| INDUCTANCE | mH/PHASE | 36 |
| HOLDING TORQUE | Kg.cm | 4.4 |
| INSULATION CLASS | B | |
Planetary Gearbox 36mm
| Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
| Powder Metallurgy | Ball Bearings | ≤120 | ≤80 | ≤500 | ≤0.03 | ≤0.1 | ≤1.5 |
| Number Of Gearbox Trains | 1 | 2 | 3 |
| Reduction Ratio |
1/5
| 1/14,1/16,1/20,1/25 | 1/53,1/62,1/76,1/94,1/117 |
| Length(mm) |
24.8
| 32.4 | 41.9 |
| Weight(g) |
145.0
| 173.0 | 213.0 |
Mechanical Dimension
Other Gearbox Ratio
| Planetary Gearbox 42mm | ||||||
| Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length (mm) | Weight(g) | Number of gear trains |
| 1/4 | 1.0 | 3.0 | 81% | 32.5 | 170 | 1 |
| 1/6 | ||||||
| 1/15 | 4.0 | 12 | 72% | 46.3 | 207 | 2 |
| 1/18 | ||||||
| 1/25 | ||||||
| 1/36 | ||||||
| 1/54 | 8.0
| 25
| 65%
| 60.1
| 267
| 3 |
| 1/65 | ||||||
| 1/90 | ||||||
| 1/112 | ||||||
| 1/155 | ||||||
| 1/216 | 10 | 30 | 65% | 60.1 | 267 | |
| Planetary Gearbox 56mm | ||||||
| Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length L (mm) | Weight(g) | Number of gear trains |
| 1/4 | 2.0 | 6.0 | 81% | 41.3 | 491 | 1 |
| 1/6 | ||||||
| 1/15 | 8.0 | 25 | 72% | 59.6 | 700 | 2 |
| 1/18 | ||||||
| 1/26 | ||||||
| 1/47 | 16 | 50 | 72% | 59.6 | 700 | 2 |
| 1/66 | ||||||
Number of Gear Trains
| Primary Drive | | |
| Secondary Drive | | |
| Three-stage Transmission | | |
Certificate
| | |
| Stepper motor ROHS report Date: June 09, 2021 | BLDC Motor ROHS report Date: June 09, 2021 | CE cetificate |
| |
| IATF 16949: 2016 Valid until: 02 June 2024 | ISO 9001: 2015 Valid until: 02 June 2024 |
Package&Delivery