Changzhou Hetai Motor And Electric Appliance Co., Ltd.
Changzhou Hetai Motor And Electric Appliance Co., Ltd.
Add to Cart
39BYGX 1700.cm torque step motor with 36mm Powder metallurgy gearbox
39BYGX series motor can match gearbox 32mm, 36mm. 32mm gearbox can only be made of powder metallurgy. For the 36 mm gearbox, you can choose the material zinc alloy and powder metallurgy. The reduction ratio of 36mm zinc alloy is 1/12. The Shaft max press-fit force for both gearboxes is ≤500N. For more details please scroll down and check more information.
MOTOR PART Electrical Specification:
| MODEL | Step Angle (°/Step) | Lead Wire (NO.) | Voltage (V) | Current (A/Phase) | Resistance (Ω/Phase) | Inductance (MH/Phase) | Holding Torque (G.CM) | Motor Height L(MM) | Motor Weight (KG) |
|---|---|---|---|---|---|---|---|---|---|
| 39BYGX001A | 1.8 | 4 | 13.44 | 0.48 | 28 | 21 | 1000 | 20 | 0.10 |
| 39BYGX002A | 1.8 | 4 | 8.4 | 0.7 | 12 | 11 | 1200 | 20 | 0.10 |
| 39BYGX100A | 1.8 | 4 | 12 | 0.4 | 30 | 20 | 1300 | 22 | 0.12 |
| 39BYGX200A | 1.8 | 4 | 14.4 | 0.4 | 36 | 33 | 1700 | 25 | 0.14 |
*Products can be customized by special request.
*Products can match gearbox 36mm
Out diameter 36mm Powder metallurgy
| Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
| Powder metallurgy | sleeve bearings | ≤120 | ≤80 | ≤500 | ≤0.03 | ≤0.1 | ≤1.5 |
| Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length (mm) | Weight(g) | Number of gear trains |
| 1/4 | 0.3 | 1.0 | 81% | 24.8 | 145 | 1 |
| 1/5 | ||||||
| 1/16 | 1.2
| 3.5
| 72% | 32.4 | 173 | 2 |
| 1/20 | ||||||
| 1/25 | ||||||
| 1/53 | 2.5
| 7.5 | 65% | 41.9 | 213 | 3 |
| 1/62 | ||||||
| 1/76 | ||||||
| 1/94 | ||||||
| 1/117 |
Mechanical Dimension
Out diameter 36mm Zinc alloy
| Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
| Zinc alloy | Porous bearings | ≤45 | ≤25 | ≤100 | ≤0.08 | ≤0.4 | ≤1.5 |
| Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length (mm) | Weight(g) | Number of gear trains |
| 1/12 | 0.3 | 1.0 | 81% | 26.8 | 100 | 1 |
Mechanical Dimension
When selecting a planetary gearbox for your application it is important to take note of;
*Specifications required – torque, backlash, ratio, etc of the application must be taken into considerations.
*Environment – some environments may leave a gearbox exposed to dust, dirt or moisture so it is important to consider this factor and select a gearbox with the correct protection.
*Space – planetary gearboxes are available in various sizes, if there is limited space available then a smaller gearbox can be used.